search

GE GUV27ESSMWW Installationshandbuch Seite 10

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 60
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 9
10
Installation Instructions
CONNECTING DRYER USING
3-WIRE CONNECTION
24” MODELS - CONNECTING AN ELECTRIC DRYER
3-wire Connection
NOT for use in Canada.
DO NOT use for Mobile Home Installations.
NOT for use on new construction.
NOT for use on recreational vehicles.
NOT for use in areas where local codes prohibit
grounding through the neutral conduction.
CONNECTING DRYER USING 4-WIRE
CONNECTION (MUST BE USED FOR
MOBILE HOME INSTALLATION)
NOTE: Since January 1, 1996, the National Electrical
Code requires that new constructions use a 4-wire
connection to an electric dryer. A 4-wire cord must also
be used where local codes do not permit grounding
through the neutral.
3-wire connection is NOT for use on new construction.
1. Turn off the circuit breaker(s) (30 amp) or remove
the dryer’s circuit fuse at the electrical box.
2. Be sure the dryer cord is unplugged from the wall
receptacle.
3. Remove the power cord cover located at the lower
back.
4. Remove and discard ground strap. Keep the green
ground screw for Step 7.
5. Install 3/4 in. UL-recognized strain relief to power
cord entry hole. Bring power cord through strain
relief.
6. Connect power cord as follows:
A. Connect the 2 hot lines to the outer screws of the
terminal block (marked L1 and L2).
B. Connect the neutral (white) line to the center of
the terminal block (marked N).
7. Attach ground wire of power cord with the green
ground screw (hole above strain relief bracket).
Tighten all terminal block screws (3) securely.
8. Properly secure power cord to strain relief.
9. Reinstall the cover.
NEVER LEAVE THE COVER OFF OF THE
TERMINAL BLOCK.
NEVER LEAVE THE COVER OFF OF THE
TERMINAL BLOCK.
L1
N
L2
RELOCATE GREEN
GROUND SCREW
HERE
STRAIN
RELIEF
BRACKET
GREEN OR
YELLOW WIRE
3/4", UL
RECOGNIZED
STRAIN RELIEF
HOT
WIRE
SCREWS
(3)
HOT WIRE
COVER
NEUTRAL
(White)
REMOVE GROUND
STRAP AND DISCARD.
KEEP GREEN
GROUND
SCREW
4 #10 AWG MINIMUM COPPER
CONDUCTORS OR 120/240V 30A POWER
SUPPLY CORD KIT MARKED FOR USE
WITH DRYERS & PROVIDED WITH
CLOSED LOOP OR SPADE TERMINALS
WITH UPTURNED ENDS (NOT SUPPLIED).
L1
L2
STRAIN RELIEF
BRACKET
3/4", UL
RECOGNIZED
STRAIN RELIEF
HOT
WIRE
HOT
WIRE
GROUND
STRAP
GREEN
GROUND
SCREW
NEUTRAL
(White)
SCREWS
(3)
COVER
3 #10 AWG MINIMUM COPPER
CONDUCTORS OR 120/240V 30A POWER
SUPPLY CORD KIT MARKED FOR USE
WITH DRYERS & PROVIDED WITH
CLOSED LOOP OR SPADE TERMINALS
WITH UPTURNED ENDS (NOT SUPPLIED).
1. Turn off the circuit breaker(s) (30 amp) or remove
the dryer’s circuit fuse at the electrical box.
2. Be sure the dryer cord is unplugged from the wall
receptacle.
3. Remove the power cord cover located at the lower
back.
4. Install 3/4-in. UL-recognized strain relief to power
cord entry hole. Bring power cord through strain
relief.
5. Connect power cord as follows:
A. Connect the 2 hot lines to the outer screws of the
terminal block (marked L1 and L2).
B. Connect the neutral (white) line to the center of
the terminal block (marked N).
6. Be sure ground strap is connected to neutral
(center) terminal of block and to green ground
screw on cabinet rear. Tighten all terminal block
screws (3) securely.
7. Properly secure power cord to strain relief.
8. Reinstall the cover.
Seitenansicht 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare
Verwandte Produkte und Handbücher für Nein GE GUV27ESSMWW
Nein GE AJEM12DCF Spezifikationen   (3 Seiten)
Nein GE GTE16DTHWW Gebrauchs- und Pflegehandbuch     (24 Seiten)
Nein GE AZ65H15DAC Spezifikationsblatt   (2 Seiten)
Nein GE JGS760DELWW Installationshandbuch   (8 Seiten)
Nein GE GFW148SSMWW Hauptspezifikationen   (4 Seiten)
Nein GE FCM5SKWW Hauptspezifikationen   (2 Seiten)
Nein GE AZ91H18E5C Bedienungshandbuch    (78 Seiten)
Nein GE JK3500SFSS Spezifikationsblatt   (2 Seiten)
Nein GE JGP633DETWW Installationshandbuch   (32 Seiten)
Nein GE GTS16DTHBB Energienachweis   (1 Seiten)
Nein GE JGB450DEKWW Infoblatt   (2 Seiten)
Nein GE JB255GJSA Installationshandbuch    (2 Seiten)
Nein GE AZ91H09E2C Spezifikationsblatt   (2 Seiten)
Nein GE GDF530PGMCC Hauptspezifikationen   (2 Seiten)
Nein GE GUD27ESSJWW Spezifikationsblatt   (3 Seiten)
Nein GE GFE26GSKSS Energienachweis   (1 Seiten)
Nein GE JB750EJES Abmessungen   (2 Seiten)
Nein GE GFXP1308FWW Installationshandbuch     (12 Seiten)
Nein GE GEJP256BMBB Bedienungshandbuch     (72 Seiten)
Nein GE GERAB46A Installationshandbuch     (12 Seiten)
  • Opticis Arrma Brunton Chevrolet Ashly-audio
  • Gary Fisher Headsets Linksys Serielle Schaltkästen Danby Kühl- und Gefrierschränke Philips Rasierer für Männer Oregon Scientific Personenwaage
  • Compaq 3000 AOC E2043F Acer BE270 Samsung S22E310HY
  • Real Flame 5910 Bedienungsanleitung Ge AJCQ12ACF Bedienungsanleitung Safco 6256 Bedienungsanleitung Electrolux EHI6340FOK Bedienungsanleitung Yamaha Tyros2 Bedienungsanleitung