GE GUV27ESSMWW Installationshandbuch PDF herunterladen (Seite 17)

Installation Instructions

FINAL SETUP

1. Carefully move the appliance to its final location.

Gently rock the appliance into position. It is

important not to damage the rubber leveling legs

when moving your appliance to its final location.

Damaged legs can increase appliance vibration.

It may be helpful to spray window cleaner on

the floor to help move your appliance to its final

position.

NOTE: Do not use washer cover to lift the unit.

2. To ensure the appliance is level and solid on all

four legs, tilt the appliance forward so the rear

legs are off the ground. Gently set the appliance

back down to allow the rear legs to self adjust.

3. With the appliance in its final position, place a

level on top of back part of the washer lid and

check it side to side, then check front to back.

Screw the front leveling legs up or down to

ensure the appliance is resting solid on all four

legs (no rocking or the appliance should exist),

turn the lock nuts on each leg up toward the base

of the unit and snug with a wrench.

NOTE: Keep the leg extension at minimum to prevent

excessive vibration. The farther out legs are extended,

the more the unit will vibrate.

LEVELING AND STABILIZING

YOUR APPLIANCE

Level

side-to-side

Level

front-to-back

2 Leveling Legs

APPLIANCE START-UP

The washer and dryer are now ready for use. See the

Owner’s Manual for proper use and care.

TO RECEIVE ANY IMPORTANT

PRODUCT NOTIFICATIONS

Please go to www.GEAppliances.com or mail in your

Product Registration Card.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Keine Kommentare

GE GUV27ESSMWW Installationshandbuch Seite 17