GE JCS57 Bedienungsanleitung PDF herunterladen (Seite 24)

CA~ ~ CLEMG

(continual)

ControlPaneland mobs

Clean up any spills or spatters with a damp cloth.

The control knobs may

Remove heavier soil with warm, soapy water.

be removed for easier

Clean control panel with mild liquid dish detergent

cleaning. To remove a

and a soft cloth. Rub control panel lightly.

knob, pull it straight off

CAUTION: Do not use abrasives of any kind

the stem. Wash the

knobs in soap and

on the control panel.

water but do not soak.

Lift-UpCooktop

Clean the area under the cooktop often. Built-up soil,

especially grease, may catch fire.

To make cleaning easier, the entire cooktop may be

lifted up and supported in the up position.

Be sure dl surface unib are turned off before

raising the cooktop. Grasp the front sides of the

cooktop and lift. The surface units and drip pans do

not need to be removed before raising the cooktop,

however, you may remove one to make raising the

cooktop easier.

To lift the cooktop:

1.Remove all items

which may slide off

the cooktop.

2. With both hands,

grasp the front edge

let the cooktop rest on it.

of the cooktop.

3. Lift the cooktop.

4. Raise the support rod and

Clean under the cooktop with hot, mild soapy water

and a clean cloth.

To lower the cooktop:

1. Lift the cooktop and lower the support rod.

2. Lower the cooktop and allow it to lock into position.

Cleatig Underthe Range

The area under the range can be reachedeastiy

forcleaningbyremovingthebottomdrawer.

Toremove,pullthedraweroutalltheway,tiltupthe

frontandremoveit.Toreplace,insertglidesatthe

backof thedrawerbeyondthestoponrangeglides.

Liftthedrawerifnecessarytoinserteasily.Letthe

frontofthedrawerdown,thenpushintoclose.

BacksplashLight

Press the backsplash light switch for ON.

CAUTION: Be surethe light is cool before removing.

Ress again for OFF.

3. Insert the new fluorescent light and twist into the

To repiace the light located in the backsplash:

lock position. (Check to make sure the new light

1. If the light cover has screws, remove the four

operates. If not, the light maybe blown.)

screws that hold it in position. Two are located

4. Replace the backsplash cover and reinsert the

on top of the backsplash and two are located under

screws that hold it into position (on some models).

the backsplash overhang.

2. If there are no screws or after they are removed, lift

the cover away and twist out the fluorescent light.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

GE JCS57 Bedienungsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen GE JCS57