GE W4L Spezifikationsblatt PDF herunterladen

AREA LIGHTING

Guide Form Specifications – 2011

Lighting Solutions

GUIDE FORM SPECIFICATIONS

GENERAL DESCRIPTION

The totally enclosed and weather-resistant luminaire designat-

ed _______ (identify) shall be a GE WALLIGHTER 400 luminaire,

ordering number _______ (specify W4L, plus ordering number

logic from catalog), or approved equal, to operate one _______

(specify [150(55V), 200, 250 or 400] watt high pressure sodium

[HPS], [175, 250 or 400] watt metal halide, or [175 or 250] watt

mercury) lamp from a nominal _______ (specify 120, 208, 220,

240, 277, 347 or 480 volt, 60 Hz or 220 or 240 volt, 50 Hz) pow-

er source. The luminaire shall include a completely prewired

integral ballast and an optical assembly that shall provide an

IES Distribution Type _______ (specify according to photometric

selection table in catalog). The luminaire shall be UL/cUL Listed

SUITABLE FOR WET LOCATIONS and UL Listed to meet Canadian

National Standards and Codes . Standard construction is IP55.

Ballast, housing, optical and luminaire assembly shall all be

from the same manufacturer.

OPTICAL ASSEMBLY

WALLIGHTER 400 LUMINAIRE

The sealed optical assembly shall have an activated-charcoal

filter enabling it to breathe as the unit heats and cools. The hy-

droformed aluminum reflector shall have a chemically bonded

lightweight non-breakable ALGLAS

finish on all surfaces for

precise light control in combination with the impact-resistant

tempered prismatic glass refractor. The optical assembly shall

contain a mogul base E39 socket with superior lamp gripping.

The socket shall have added insulation, giving it the ability to

handle the higher pulse ratings of newer HID systems. The

reflector and socket shall be easily removed with only a screw

driver for a tool.

* REFER TO PRODUCT PAGE FOR BALLAST SELECTIONS. FOR

MORE DEFINITIVE INFORMATION, REFER TO BALLAST SPECIFICA-

TIONS IN TECHNICAL DATA SECTION.

BALLAST OPERATION

The luminaire shall have a standard _______ (specify) bal-

last*. The plug-in type ignitor (for HPS only) and ballast shall

be prewired to the lamp socket requiring connection of power

supply leads only. The ballast shall be in full compliance with

lamp-ballast specifications available to the fixture manufac-

turer from the lamp manufacturers at the time of fixture manu-

facture.

The ballast shall reliably start and operate the lamp in ambient

temperatures down to -20°F for mercury and metal halide and

-40°F for HPS.

MECHANICAL CONSTRUCTION

The luminaire shall include a die-cast aluminum housing with

ballast, prewired terminal board, sealed and filtered optical

assembly and a die-cast aluminum side-hinged door with glass

refractor sealed to it. Die-cast aluminum surfaces shall have an

electrocoat dark bronze paint finish. Mounting shall be by three

bolts through back holes provided for mounting on vertical or

horizontal surfaces. There shall be ¾-inch (19mm) NPT conduit

entrances (and provisions for an optional prewired photoelec-

tric receptacle.

1 2

Inhaltsverzeichnis

Seite 1 - WALLIGHTER 400 LUMINAIRE

AREA LIGHTINGGuide Form Specifications – 2011gGE Lighting SolutionsGUIDE FORM SPECIFICATIONSGENERAL DESCRIPTIONThe totally enclosed and weather-resis

Seite 2 - 1 6 9 4 3 5 3 3- - -- 8 8 8

gGE Lighting Solutions is a subsidiary of the General Electric Company. Evolve and other trademarks belong to GE Lighting Solutions. The GE brand and

Weitere Dokumente für Nein GE W4L

Um das Dokument anzuzeigen GE W4L Installationsanleitung

GE W4L Installationsanleitung (4 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

GE W4L Spezifikationsblatt

Stöbern Sie online oder laden Sie Spezifikationsblatt nach Nein GE W4L herunter. GE W4L Specification Sheet Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Nein GE W4L

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein GE W4L