GE EFNA Installationsanleitung PDF herunterladen (Seite 3)

2. Vertical Aiming

When glass is in vertical orientation remove two

drain screws from adapter as shown in Figure 4

IMPORTANT: make sure both power door drain

screws and all four rear drain hole screws are in

place in the vertical orientation.

3. Upward Aiming

When the glass is facing upward, remove the

four rear drain hole screws.

IMPORTANT: make sure both power door drain

screws are in place on upward orientations

Dimming Control (If Applicable):

• No external connections for Dimming are required

when the GE Dimming PE Control and GE Dimming

PE Receptacle is used.

• All dimming control connections will be made

between the Dimming PE and Luminaire through the

included PE Receptacle.

• Refer to instructions included with GE Dimming PE

Control regarding appropriate settings for dimming

control.

External Dimming Control (If Applicable):

• Gray Lead = 0VDC (-)

• Violet Lead = Up To 10VDC (+)

Dimming Input/Output

Control Voltage

Low (0-1.25V) High(7.5-10V)

Nominal Input Wattage

10% of Max 100%

Nominal Lumen Output

•

Linear Transition between Low and High

•

Component and system tolerance may affect the

end point levels and linearity of transition

FIGURE 4

FIGURE 5

Drain Screws remain

for forward position

Remove Drain Screw

for forward position

Drain Screws remain

for forward position

FIGURE 6

Remove Drain Screw

for upward position

Drain Screw remain

for upward position

1 2 3 4 5 6 7 8 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

GE EFNA Installationsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein GE EFNA