GE EAMD Installationsanleitung PDF herunterladen (Seite 2)

INSTALLATION

HANDLING

• This luminaire has been properly packed so that no

parts should have been damaged during transit.

• Inspecttoconrm.

• Damage may occur if luminaire is improperly handled

outside of pack.

• Do not impact or stack luminaire after removal from

packaging.

UNPACKING

Vertical Pole Mounting:

Thisluminairehasbeenconguredspecicallyto

mount to a 2 inch pipe (2-3/8” OD).

• Place pole adaptor on 2 inch pole top.

 • Tighten the (6) set screws to 18-26 inch-lbs

(2-3 N.m).

 • Inspectinstallationtoensurextureissecure.

WIRING

WARNING

Risk of injury or damage. Unit will fall if not installed

properly. Follow installation instructions.

WARNING

Undernocircumstancesshouldxturemountingscrewsbe

torqued to greater than 90 inch-lbs (10 N.m).

• NOTE: Make all electrical connections in accordance

with the National Electrical Code and any applicable

local code requirements. Strain relief for incoming

power must be provided in the pole top by customer.

• NOTE: Verify that supply voltage is correct by

 comparingittonameplateonxtureorcarton.

• Connect luminaire lead wires to supply wire.

• Connections are to be made in interior of pole.

• Connect black lead to L1, white lead to neutral or L2,

green lead to ground.

• A wiring diagram is provided on a label inside

luminaire for reference.

Horizontal Pole Mounting:

Thisluminairehasbeenconguredspecicallyto

mount to a 2 inch pipe (2-3/8” OD).

• Place pole adaptor on 2 inch horizontal pole

arm.

• Tighten the (6) set screws to 18-26 inch-lbs

(2-3 N.m).

 • Inspectinstallationtoensurextureissecure.

1 2 3 4 5 6 7 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

GE EAMD Installationsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein GE EAMD