GE CTR 80 Bedienungsanleitung PDF herunterladen (Seite 29)

1) The system fuses are 20 amp SB, 250V for 115 VAC operation and 10

amp ST, 250 V for 230 VAC operation.

2) The power cord is rated at 115 VAC, 20 amps. (230 VAC, 10 amps op-

tional.)

3) A drain plug is provided for ease of removing the fluid media from the

bath. Always use a container of adequate size to hold the FULL LOAD

of fluid. Some oils are more easily drained at higher temperatures.

Caution: Do not exceed a 100°C fluid temperature for draining. The valve

could be damaged if 100°C is exceeded. Insulate the container from the

floor and other objects.

4) The serial RS-232 interface attaches to the back of the bath at the con

nector labeled "RS-232".

5) The removable vent panel can be removed to access the condensor for

cleaning. See Section 12, Maintenance.

7 Parts and Controls

RS-232

DRAIN

FUSE

POWER

FUSE

Figure 3 Back Panel

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 60 61

Keine Kommentare

GE CTR 80 Bedienungsanleitung Seite 29