GE GXMH31H Installationsanleitung PDF herunterladen (Seite 21)

Programming the Water Softener.

FEATURE: OTHER DATA DISPLAY

These models have an option to have the run display

indicate different information. The information

displayed on the top half of the display can be changed

to one of the following by pressing UP

or DOWN

buttons:

 CAPACITY REMAINING

– This is the percentage of water

softening capacity remaining.

Immediately after a regeneration,

100% shows. As water is used,

the percentage will decrease

until the next regeneration. During regenerations, the

percentage increments upward.

When present time is displayed, press the DOWN

button; % Remaining will appear in the display. The

value shown is between 0 and 100 percent. This value

is based on current operating capacity. Pressing the

button will return the screen to the previous

display.

 AVERAGE DAILY GALLONS

– The figure displayed is the

average gallons of water used by

the household each day over the

past seven-day period.

Press the DOWN

button again to display the

Average Daily Gallons. Average Daily Gallons will

appear in the display. This value is updated every night

at midnight. Pressing the UP

button will return the

screen to the previous display.

 FLOW RATE, GPM

– When using soft water, this

display shows the flow rate

passing through the softener (in

gallons per minute). Zero shows

if water is not passing through

the softener.

Press the DOWN

button again to display the flow

rate. Gallons/Min will appear in the display. This value

is updated every

ø2 second. Pressing the UP button

will return the screen to the previous display. Pressing

the DOWN

button will return the screen to the

present time display.

RESETTING TO FACTORY DEFAULT

To reset the electronic controller to its factory

default for all settings (time, hardness, etc.):

1. Press the MODE/SET button and hold until the

display changes twice to show the flashing

mode code.

2. Press the UP

button to display a flashing

“SoS”.

3. Press the MODE/SET button and the electronic

controller will restart.

4. Set the present time, hardness, etc, as described

in the Programming the Water Softener section

Days to Empty

Recharge

Tonight

% Remaining

Days to Empty

Recharge

Tonight

Average Daily

Gallons

Days to Empty

Gallons/Min

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 80 81

Kommentare zu diesen Handbüchern

Keine Kommentare

GE GXMH31H Installationsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein GE GXMH31H