GE EAMD Installationsanleitung PDF herunterladen

GEH-5985

INSTRUCTIONS

GE Evolve

™

LED

Contemporary Domed

Area Luminaire

READ THOROUGHLY BEFORE INSTALLING

SAVE THESE INSTRUCTIONS FOR FUTURE USE

WARNING

Risk of electric shock

• Turn power o before servicing

See instructions

WARNING

Risk of Injury, Unit will fall if not installed properly

• Follow installation instructions

GENERAL

This luminaire is designed for outdoor lighting service, and should not

be used in areas of limited ventilation, or in high ambient tempera-

tures. Best results will be obtained if installed and maintained accord-

ing to the following recommendations. Luminaire is designed to oper-

ate in ambient temperatures ranging from –40° C to +35° C and to be

mounted horizontally with LED facing down as shown.

SPECIFICATIONS

Weight: 24-31 lbs (11-14 kg)

EPA: 0.97 (Calculated using 0.81 Cd X Total Area of 1.21 ft²)

IP Rating: Optical 65, Standard Electrical Enclosure 44

UNPACKING

This luminaire has been properly packed so that no parts should have

been damaged during transit. Inspect to conrm.

HANDLING

Damage may occur if luminaire is improperly handled outside of pack.

Do not impact or stack luminaire after removal from packaging.

HORIZONTAL POLE MOUNTING:

This luminaire has been congured specically to mount to a

2 inch pipe (2-3/8” OD).

1) Place pole adaptor on 2 inch horizontal pole arm.

2) Tighten the (6) set screws to 18-26 inch-lbs (2-3 Nm).

3) Inspect installation to ensure xture is secure

WARNING

Under no circumstances should xture mounting

screws be torqued to greater than 26 inch-lbs.

INSTALLATION

VERTICAL POLE MOUNTING:

This luminaire has been congured specically to mount to a

2 inch pipe (2-3/8” OD).

1) Place pole adaptor on 2 inch pole top.

2) Tighten the (6) set screws to 18-26 inch-lbs (2-3 Nm).

3) Inspect installation to ensure xture is secure

Lighting Solutions

These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation,

operation or maintenance. Should further information be desired or should particular problems arise which are not covered suciently for the purchaser’s purposes,

the matter should be referred to GE Lighting Solutions.