GE GTX42EASJWW Hauptspezifikationen PDF herunterladen

Listed by

Underwriters

Laboratories

GTX42EASJ

Series 6.2 Cu. Ft. Capacity Aluminized

Alloy Drum Electric Dryer with HE Sensor Dry

Specification Created 7/15

For answers to your Monogram

, GE Profile

™

Series or GE

Series appliance questions,

visit our website at geappliances.com or call GE Answer Center

service, 800.626.2000.

ElEctric DryEr rating:

240V 5600W 24A 60Hz

208V 4400W 22A 60Hz

Exhaust OptiOn: 4-way rear, right,

left and bottom

circuit rEquirEmEnts: An

individual, properly-grounded branch

circuit, protected by a 30-amp circuit

breaker or a time-delay fuse, is required.

nOtE: Dryer wall outlet must be

located within 36" of service cord entry

and acessible when dryer is mounted in

position.

installatiOn infOrmatiOn:

For complete information, see installation

instructions packed with your dryer.

DimEnsiOns anD installatiOn infOrmatiOn (in inchEs)

spEcial installatiOn rEquirEmEnts

alcOvE Or clOsEt installatiOn:

- If your dryer is approved for installation in an alcove or closet, it will be stated on a label on

the dryer back.

- The dryer MUST be exhausted to the outside.

- Minimum clearances between dryer cabinet and adjacent walls or other surfaces are:

0" either side; 3" front and rear

- Minimum vertical space from floor to overhead cabinets, ceilings, etc. is 52".

- Closet doors must be louvered or otherwise ventilated and must contain a minimum of 60 sq. in.

of open area equally distributed. If this closet contains both a washer and a dryer, doors must

contain a minimum of 120 sq. in. of open area equally distributed.

- No other fuel-burning appliance shall be installed in the same closet with a gas dryer.

BathrOOm Or BEDrOOm installatiOn:

- The dryer MUST be exhausted to the outdoors.

- The installation must conform with the local codes, or in the absence of local codes, with the

National Electric Code and National Fuel Gas Code, ANSI Z223 for gas dryers.

minimum clEarancEs OthEr than alcOvE Or clOsEt installatiOn:

- Minimum clearances to combustible surfaces are: 0" both sides; 3" rear

DryEr Exhausting infOrmatiOn :

Use metal duct only, vertical and horizontal ducting.

22 1/2"

26 3/4"

1 3/4"

3 1/4"

4 1/4"

37 1/2"

44"

27"

Power Cord 4 1/2"

11 3/4"

Side View

Rear View

Inhaltsverzeichnis

Seite 1

Listed by Underwriters LaboratoriesGTX42EASJ GE® Series 6.2 Cu. Ft. Capacity Aluminized Alloy Drum Electric Dryer with HE Sensor DrySpecification Cre

Seite 2

Weitere Dokumente für Wäschetrockner GE GTX42EASJWW

Um das Dokument anzuzeigen GE GTX42EASJWW Gebrauchs- und Pflegehandbuch

GE GTX42EASJWW Gebrauchs- und Pflegehandbuch (12 Seiten)

Um das Dokument anzuzeigen GE GTX42EASJWW Spezifikationsblatt

GE GTX42EASJWW Spezifikationsblatt (3 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

GE GTX42EASJWW Hauptspezifikationen

Stöbern Sie online oder laden Sie Hauptspezifikationen nach Wäschetrockner GE GTX42EASJWW herunter. GE GTX42EASJWW Quick Specs Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Wäschetrockner GE GTX42EASJWW

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wäschetrockner GE GTX42EASJWW