GE 71401HD Bedienerhandbuch PDF herunterladen

MODEL NO. 71401N (0.09)

16L BETLEHEM STAR CAPIZ

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.

When products are used in outdoor applications, connect the product to a Ground Fault Circuit

Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper

installation.

This seasonal use product is not intended for permanent installation or use.

Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of

heat.

Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

Do not let lamps rest on the supply cord or on any wire.

Unplug the product when leaving the house, when retiring for the night, or if left unattended.

This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock

it should not be played with or placed where small children can reach it.

Do not use this product for other than its intended use.

Do not hang ornaments or other objects from cord, wire, or light string.

Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while

the power is on.

Do not perform any maintenance or troubleshoot for bad or broken lamps while the power is on.

Do not close doors or windows on the product or extension cords as this may damage the wire

insulation.

Do not cover the product with cloth, paper or any material not part of the product when in use.

This product is equipped with push-in type lamps. Do not twist lamps.

This product employs overload protection (fuse). A blown fuse indicates an overload or short-

circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional

strings or products that may be attached to the product. Replace the fuse as per the user

servicing instructions (follow product marking for proper fuse rating) and check the product. If the

replacement fuse blows, a short-circuit may be present and the product should be discarded.

Read and follow all instructions that are on the product or provided with the product.

SAVE THESE INSTRUCTIONS

Use and Care Instructions

When the product is placed on a live tree, the tree should be well maintained and fresh. Do

not place on live trees in which the needles are brown or break off easily. Keep the tree

holder filled with water.

If the product is placed on a tree, the tree should be well secured and stable.

) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged,

or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or

exposed copper wire.

When storing the product, carefully remove the product from wherever it is placed, including tree

branches, or bushes, to avoid any undue strain or stress on the product conductors, connections,

and wires.

) When not in use, store neatly in a cool, dry location protected from sunlight.

User Servicing Instructions

Fuse replacement:

Most often, fuses blow because too many sets have been strung end-to-end.

a) Before changing fuses, make sure the set is unplugged.

-See other side-

-Continued from other side-

b) Grasp plug and remove from the receptacle or other outlet device.

Do not unplug by pulling on cord.

c) Using a flathead screwdriver, open fuse cover. Slide open

the fuse access cover on top of attachment plug towards blades.

d) Removes fuses carefully.

e) Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided with product).

f) Close fuse cover. Slide closed the fuse access cover on top of current tap.

Make sure door is fully closed and fuses are completely covered.

Risk of fire. Do not replace current tap. Contains a safety device (fuse) that

should not be removed. Discard product if the current tap is damaged.

Bulb replacement:

Before changing bulbs, make sure set is unplugged.

Step 1:

Grasp plug and remove from the

Step 3:

Replace lamp with only 8 Volt,

receptacle or other outlet device. 0.72 Watt super brightness midget push-

Do not unplug by pulling on cord. in type lamp provided with product.

Step 2:

Hold bulb by the plastic base Push spare bulb/base assembly into socket.

and pull bulb/base straight Do not twist bulb when inserting into socket.

out of socket. If bulbs are twisted, part of the set will not light.

If the spare bulbs provided with the product have no plastic base or

the plastic base does not fit , first follow steps 1 – 2 above. Then

Remove the old bulb by straightening the bulb wires and

pulling bulb straight from the base.

Replace the new bulb by straightening the bulb leads and

aiming each wire into a separate hole in the plastic base.

Make sure each bulb lead comes out an exit opening at the bottom of the plastic base.

Now bend each lead up such that each bulb lead fits closely agains the narrow side of the plastic base.

1. This lighting string is rated 10.8 Watts (0.09 Amps), do not overload.

2. Replace lamps only with 8 volt, 0.72 Watt spare lamps provided with

this product .3. Risk of fire. This product does not contain lamp shunts in order to allow the product

to operate if one lamp burns out. Do not replace lamps with other than the spare lamps provided

with this product.

TROUBLE SHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

If the product does not

light

One or more of the based bulbs

may have loosened from the socket

during transp

orting. There is a break

in the circuit between the bulb leads

and the socket terminals. Fuse(s)

may have moved.

Unplug the set at the outlet. Starting

with the first unlit bulb, gently push

(don’t twist) each bulb base firmly

into the socket. If still does not light,

then remove each based bulb to

check for out of place lead wires.

Open fuse door and check fuses.

If a bulb is broken Bulbs may have hit against each

other when transporting.

Mark socket(s) with a piece of tape

and unplug the set before removing

the based bulb from the socket.

Replace the broken bulb. Should

another bulb flicker while doing this

that is a faulty bulb. Replace with a

new bulb.

If a based bulb is

missing

One or more of the based bulbs

may have come out of the socket

when tr

ansporting.

Mark socket with a piece of tape

and unplug the set. Replace based

bulb or us

e one of the spare based

bulbs included with product.

If a bulb burns out Incorrect bulb, premature bulb

failure or voltage is too high.

The remaining bulbs should remain

lit. However, it is best to replace

burned o

ut bulbs as soon as you

find them.

For questions and/ or assistance, call customer service at 1-877-398-7337

or visit us on the web at www.geholidaylighting.com.

Nicolas Holiday Inc.,9F., No.35, Guangfu N. Rd. Taipei, Taiwan 10560

MADE IN PHILIPPINES

1 2

Inhaltsverzeichnis

Seite 1 - SAVE THESE INSTRUCTIONS

MODEL NO. 71401N (0.09) 16L BETLEHEM STAR CAPIZ IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions

Seite 2 - CONSERVE ESTAS INSTRUCCIONES

MODELO NO. 71401N (0.09) ESTRELLA DE BELEN DE CAPIZ 16 LUCES IMPORTANTES INSTRUCCIONES SOBRE SEGURIDAD Cuando se usan producto

Kommentare zu diesen Handbüchern

Keine Kommentare

GE 71401HD Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Kamine GE 71401HD herunter. GE 71401HD Instructions / Assembly Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamine GE 71401HD