GE GFXP1308FWW Installationshandbuch PDF herunterladen

REMOVE THE LEVELING LEGS

Carefully lay down the appliance to access

the leveling legs on its bottom. The washer

shipping bolts must remain in place until the

washer is returned to an upright position.

Washer – Lay on its back

Dryer – Lay on its side

Use an adjustable wrench to remove the

washer or dryer leveling legs.

INSTALLATION PREPARATION

Remove the packaging.

Flatten the product carton to use as a pad to lay

the washer or dryer down on its side. Continue using

the carton to protect the finished floor in front of the

installation location.

 4 Mounting screws -

Dryer



4 Mounting bolts -

Washer



Drawer divider

TOOLS YOU WILL NEED

 Phillips-head

screwdriver



9/16” socket wrench



8 mm socket wrench



10” Adjustable

wrench

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•

IMPORTANT – Save these instructions for local

inspector’s use.

•

IMPORTANT – Observe all governing codes and

ordinances.

•

Note to Consumer – Keep these instructions for future

reference.

•

Completion time – 1 to 2 hours

•

Proper installation is the responsibility of the installer.

•

Product failure due to improper installation is not

covered under the Warranty

CAUTION ³'XHWRWKHVL]HDQGZHLJKW

of these products, and to reduce the risk of

SHUVRQDOLQMXU\RUGDPDJHWRWKHSURGXFW7:2

PEOPLE ARE REQUIRED FOR PROPER INSTALLATION.

• See washer and dryer Owner’s Manual & Installation

Instructions for additional installation requirements and

guidelines.

Instructions en français : . . . . . . . . . .. . . . . .5

Instrucciones en español: . . . . . . . . . . . . . . .9

Installation

Instructions

White Pedestal: GFXP1308FWW

Red Pedestal: GFXP1308FRR

Metallic Carbon Pedestal: GFXP1308FMC

For Washer Models:

GFWS2500, GFWS2505, GFWS2600, GFWS2605,

GHWS3600, GHWS3605, GFWS3700 and GFWS3705

For Dryer Models:

GFDS250, GFDS255, GFDS260, GFDS265, GHDS360,

GHDS365, GFDS370 and GFDS375

Pedestal

31-16708 02-13 GE

Printed in the United States

KIT CONTENTS

1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - Pedestal

1 REMOVE THE LEVELING LEGSA Carefully lay down the appliance to access the leveling legs on its bottom. The washer shipping bolts must remain in pla

Seite 2

3 CÓMO INSTALAR EL PEDESTAL EN LA LAVADORA O SECADORAA Coloque el pedestal contra la parte inferior de la unidad. Controle que el frente del cajón

Seite 3 - Installation Instructions

Instrucciones de instalación4 CÓMO NIVELAR LA LAVADORA O SECADORAA Coloque la lavadora o secadora en posición vertical. Colóquela cerca de su ubica

Seite 4

12GE AppliancesGeneral Electric CompanyLouisville, Kentucky 40225GEAppliances.comSPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Seite 5 - Piédestal

3 INSTALL THE PEDESTAL TO THE WASHER OR DRYERA Place the pedestal against the bottom of the unit. Check to be sure the drawer front is at the front

Seite 6 - Instructions d’installation

Installation Instructions4 LEVEL THE WASHER OR DRYERA Stand the washer or dryer upright. Move it close to its final location.B Make sure that the

Seite 7

4Notes

Seite 8

COMMENT PRÉPARER L’INSTALLATIONRetirez l’emballage.Aplatissez le carton pour l’utiliser comme cale pour poser la sécheuse sur le côté. Utilisez le car

Seite 9 - Instrucciones de

Instructions d’installation3 COMMENT INSTALLER LE SOCLE SUR LA LAVEUSE OU LA SÉCHEUSEA Placez le socle au bas de l’appareil. Veillez à ce que l’ava

Seite 10 - Instrucciones de instalación

4 COMMENT METTRE LA LAVEUSE OU LA SÉCHEUSE DE NIVEAUA Placez la laveuse ou la sécheuse debout. Placez-la proximité de l’endroit où vous avez prévu

Seite 11

8Notes

Seite 12 - GEAppliances.com

PREPARACIÓN PARA LA INSTALACIÓNQuite el envoltorio. Aplaste el cartón del producto para poder utilizarlo para colocar la lavadora o secadora de costad